Private Office DR RAVI PILLAI

Dr Ravi Bare 1

When the designers at Bare Design were faced with an unusually demanding furniture brief, they called on Noble Russell to develop and manufacture three bespoke pieces for the private offices of Dr Ravi Pillai, founder and chairman of the RP Group. Pillai built his business interests from contracting work in the Gulf into a diversified group with interests spanning construction, infrastructure, hospitality, healthcare, education and real estate.

The commission comprised a low table, a curved sofa and a substantial bespoke desk. Of the three pieces, the desk presented by far the greatest manufacturing challenge. Its unusual organic form was created from multiple CNC-shaped layers of MDF, stacked to form a large dumbbell-shaped structure. The internal construction incorporated carefully positioned voids to reduce weight while accommodating structural requirements, electrical connections and four drawers.

The MDF core was then completely wrapped in pewter, which was dressed and polished to create a seamless, flowing surface. A 15mm toughened glass top completed the desk, allowing the sculptural form and highly finished metalwork to remain the focus. Beneath the desk, precast concrete pad stones were incorporated into the floor, providing the substantial fixing required for such a large and unusually shaped piece of furniture.

The desk was as challenging to move as it was to manufacture. Weighing approximately 300kg, it had to be transported from the UK to the Middle East before being manoeuvred into the building and taken to the 27th floor. Its size meant that it could not simply be placed horizontally into the lift. Instead, the desk had to be carefully threaded into the lift and held at an angle of approximately 60 degrees during the journey upwards.

Once on the correct floor, the installation required the same level of care as the manufacturing process. The desk had been designed as a single sculptural form, but its scale, weight and unusual geometry left very little room for error during handling and positioning. Successfully getting the finished piece into its final location was therefore a significant part of the project in its own right.

The commission is a particularly good example of the relationship between design and manufacturing in bespoke furniture. Bare Design had created an ambitious piece with a highly distinctive form, but translating that idea into a structurally sound, functional and transportable desk required a considerable amount of engineering and manufacturing development. The finished piece had to look effortless, despite the complexity hidden within it.

For Noble Russell, projects such as this demonstrate what can happen when conventional furniture-making is pushed well beyond standard forms and construction methods. From CNC shaping and specialist metal finishing to structural fixing, integrated electrics, complex logistics and installation at height, the desk brought together a wide range of skills in a single piece of furniture.

Dr Pillai Noble Russell

Dr Ravi Bare 5

Dr Ravi Bare 2

Dr Ravi Bare 3

Dr Ravi Bare 4

…

Dr Ravi Bare 1